Walton Primo NH3 Partition Information

Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
 Card/BGA: BGA (Discrete embedded) - High density MMC
 Manufacturer ID: 0x15 (Samsung)
 Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0x760DD87A
 Manufacturing date: Dec 2017
CID: 15010051 4536334D 4203760D D87AC426
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
 No boot acknowledge is sent (default)
 Device is not boot-enabled (default)
Partitioning support: 0x07
 Device support partitioning feature
 Device can have enhanced technological features
 Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
 Power-on write protection: possible
 Permanent write protection: possible
 Lock status: not locked

ANDROID System Info:
 platform: MT6580, cpu abi: armeabi-v7a
 manufacturer: WALTON
 board: WALTON, name: Walton_Primo_NH3
 brand: WALTON, model: Primo NH3
 build id: NRD90M, version: 7.0 Nougat (Walton_Primo_NH3_V04)
 build description: full_vs6580_we_n-user 7.0 NRD90M 1496669885 release-keys

Internal storage: 1.95 GiB
crypto state: unencrypted
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb   (BGA221)